产品特点： 1、的光束质量：本系列机器比传统的打标机好很多，聚光直径不到20um/发散角是半导体泵浦激光器的1/4。适用于精密，精细打标。 2、使用成本低廉：电光转换率高，整机耗电不到500W，是灯泵浦激光器的1/10。 3、免维护操作：激光器无需进行任何维护，也不用调节和清洁镜片。 4、使用寿命长：使用激光二极管做为泵浦源，其工作时间长达10万小时。 5、体积小适用于恶劣环境：采用光缆实现激光传输，结构紧凑。在一定冲击振动和较高温等恶劣环境下也能正常工作。 6、加工速度快：是传统激光打标机的2到3倍。 广泛应用： 应用于对深度、光滑度、精细度要求较高的领域，首饰、饰品打标、纸品包装打标、汽车配件打标、电子五金打标、卫生洁具打标、玻璃制品打标、位图打标、可在金属，塑料等表面标刻出精美的图片。 技术参数 平均输出功率：20W 激光波长：1060nm 激光输出功率：20KHZ-80KHZ连续可调 供电电源：单相交流90-260V/50HZ-60HZ 用电功率：< 160W 外型尺寸：570mm*270mm*200mm 整机重量：< 22KG 聚焦光点直径：<0.01mm 打标速度：30mm/30mm-300mm/300mm可选 打标区域：> 800个标准字符/秒 半导体模块寿命：> 50万小时 计算机操作系统：Win98/Win2000/XP 冷却方式：内置风冷 控制接口：标准USB 可接受的字体与文件格式：WINDOWS操作系统字库的所有字体/字型(包括各国语言文字/条形码等);BMP/PCX等带256灰度图像文件及DXF/PLT格式的矢量图形文件 Feature The new generation of fiber laser marking system has the revolutionary ： 1. It has volume slightly, the semiconductor module has got long life (>500 thousand hours), the power consumption is low (160Q) 、The beam quality is high, the USB connection, supports WIN98/2000/XP and other operating system. 2. It is not influenced by bad circumstance and temperature change; May use the accumulator cell and an automobile smoke under the power cut condition and so on carries on the operation. Before Fiber laser appeared, laser marking system normally adopts Continuous or pulse output CO2 laser tube, ND-YAG Laser tube as laser source. Compared with traditional laser source, the performance of fiber laser is more excellent, Radiation angle is 1/4 of Diode-pumped laser tube (more suitable for precise and fine marking); the conversion efficiency of electro-optic is 1/10 of lamp pumped solid laser marker; The average working time reaches 100,000 hours; 3. Fiber laser is a type of full air cooling, so it doesn’t need refrigerant device, freezing water pipe or temperature　controller, the volume is reduced, energy consumption is decreased, so the use cost of user is much lower than use cost of traditional laser marking system. 4.The pulse of ETL Fiber laser is 10-100KHz repeat frequency working, The volume of the fiber laser which average power output is 10W-20W is only 46*160*250cm, and weight is 10kg; Because laser diode is working in low voltage, the conversion efficiency of electro-optic is up to 70%, and driving power supply can use UPS power supply when the power is shut off the power consumption is only 160W. Parameter Power: 20W Laser length: 1060nm Laser power: 20KHZ-80KHZ continual Power supply: Single phase AC 220V/50HZ-60HZ Electricity power: < 160W Machine dimension: 570mm×270mm×200mm Wet weight: < 22KG Focusing spot diameter: <0.01mm Marking area: 30mm/30mm-300mm/300mm optical Marking speed: > 800character/s Semiconductor life: > 500,000 hour Marking depth: 0.01-0.2mm Operational system: Win98/Win2000/XP Cooling mode: Air cooling Controlling joint: Standard USB Accept typeface and document format: WINDOWS operating system fonts all typefaces/Font (including various countries language and writing/Bar code and so on); BMP/Belt 256 gradation images document and DXF/ and so on PCXPLT form vector graphic file 参考样品 Sample for reference